Ask for a round rod and you give one number: the diameter. Ask for aluminium hexa rods and one number is not enough, because a six-sided bar can be measured in two different ways. Many wrong orders start exactly there.
This guide explains how hex rods are specified, how to estimate their weight, and what to settle with your supplier before placing an order in Delhi NCR.
What Are Aluminium Hexa Rods?
Aluminium hexa rods are solid aluminium bars with a hexagonal (six-sided) cross-section. They are also called aluminium hexagonal rods or aluminium hex bars. In trade, these names usually mean the same product.
Like other aluminium rods, they offer a useful mix of lightweight construction, corrosion resistance, a good strength-to-weight ratio and easy machining and fabrication. The six flat faces add one more practical benefit: a spanner or holding tool can grip the bar or the part made from it.
Across Flats vs Across Corners
This is the most important thing to understand about a hexagon aluminium rod.
- Across flats (AF): the distance between two opposite flat sides. Hex bar size is normally given this way.
- Across corners (AC): the distance between two opposite corners. It is always larger, about 1.155 times the AF.
For example, a 19 mm AF bar measures about 21.9 mm across the corners. If you check incoming material with a caliper across the corners, it will look oversize when it is not. Always measure across the flats.
There is one more point if you plan to machine round parts from hex stock. The largest fully round diameter you can turn is equal to the across-flats size. Anything larger leaves flat patches on the surface.
Estimating Weight Per Metre
Aluminium has a density of about 2.7 g/cm³, roughly a third of steel. The area of a regular hexagon is 0.866 × AF², so:
Weight (kg per metre) ≈ AF (mm) × AF (mm) × 0.002338
| Across flats (mm) | Approx. weight per metre |
|---|---|
| 10 | 0.23 kg |
| 13 | 0.40 kg |
| 17 | 0.68 kg |
| 19 | 0.84 kg |
| 24 | 1.35 kg |
| 30 | 2.10 kg |
These are theoretical figures for estimating and comparing quotes, not for final billing. The sizes are examples for the calculation, not a stock list. Actual weight can vary slightly with tolerance and corner shape.
Alloy and Temper: Never Leave Them Out
“Aluminium rod” is not one single product, and the same applies to hex rods. The alloy decides how the bar machines, how it handles stress and how it behaves outdoors. The grades commonly discussed for aluminium rods include:
- 6061 (usually in T6 temper): a general-purpose choice that machines well, welds well and offers a good strength-to-weight ratio.
- 6063: known for a smoother finish and good corrosion resistance, popular in architectural and decorative work.
- 1100 and other 1xxx series: nearly pure aluminium, soft and corrosion resistant but not strong.
- 2024 and 7075: high-strength alloys for heavily stressed components, generally with lower corrosion resistance and higher cost.
Availability of a specific alloy in hex form depends on stock, so confirm this with your supplier. Whatever you choose, write the alloy and temper on your purchase order, for example “6061-T6 hex rod, 19 mm AF”.
What to Check Before Ordering Aluminium Hexa Rods
- Alloy and temper: state both clearly.
- Across-flats size: mention the size and any tolerance requirement.
- Length: full length or cut to size. Cut-to-size can reduce scrap.
- Straightness and surface: check a sample for bends, scratches, pitting or cracks.
- Test certificate: a mill test certificate shows chemical composition and mechanical properties. Ask for it before ordering, not after a dispute.
- Standards: Indian buyers commonly refer to IS 733 for wrought aluminium bars, rods, tubes and sections. If your drawing names a standard, tell the supplier.
- Pricing: aluminium prices move with the market. A fair quote depends on alloy, size and quantity, so be careful with a price far below everyone else’s.
For a deeper look at the supplier side, read our guide on choosing an aluminium rods wholesale supplier in Delhi.
Hex, Round or Square?
- Choose hex when you need flat faces for a spanner grip or a six-sided profile.
- Choose round for turned parts. See our aluminium rods page.
- Choose square for equal flat faces and a neat edge. Our guide to aluminium square rods in Delhi covers it.
Sourcing Aluminium Hexa Rods in Delhi NCR
A nearby supplier lets you discuss specifications in person, see the material and reorder quickly when plans change. Ajanta Industries is based at 6, Raghushree Market, Ajmeri Gate, Delhi-110006, and serves manufacturers, fabricators, contractors, dealers and commercial buyers. Pricing depends on product, specification and quantity.
To get an accurate quote, share:
- Alloy and temper (or the end use, if unsure)
- Across-flats size
- Length and quantity
Send your requirement through our contact page and the Ajanta Industries team will take it from there.
FAQs
Is an aluminium hexa rod the same as an aluminium hex bar?
Yes. Both describe a solid bar with a six-sided cross-section.
How is hex rod size measured?
Across flats, meaning the distance between two opposite flat sides.
Can I machine a round part from hex rod?
Yes. The largest fully round diameter equals the across-flats size.
How do I estimate the weight?
Multiply AF × AF (in mm) by 0.002338 to get kg per metre.
Final Thoughts
Aluminium hexa rods are easy to order wrongly and easy to order correctly. Specify across flats, write the alloy and temper, ask for a test certificate on critical jobs, and check straightness on arrival. Share your size, alloy and quantity with Ajanta Industries to get started.



